36. You can tow the forklift to the
safe place with towing pin when the
forklift can‟t run.
·Don‟t tow the truck which steering
system or brake system h日as been
damaged.
37. There is operating method and
warning label on the truck. Please
operate the truck obey the rules on the
label and this manual. Often inspect the
nameplate, when damaged or lost please
replace it.
38. Fire extinguisher must be
prepared at working place. Users can
select fire extinguisher along with truck,
and it usually is fixed on rear supported
leg of safety shelf, it is easy to pick.
Driver and manager should be
familiar with the position and operation
of fire extinguisher.
39. Please use stock when conveying
little goods, it is forbidden to use fork
directly.
40．The work road surface for forklift
should be stability and unknit, cement,
blacktop or beton. If there are snow, ice,
water or other eyewinker, bar. Eliminate
all, then work. Otherwise the truck will
be out of control and lead the safety
accident.
41. Move the truck to the place which
respects traffic when it anchors. If the
reason is brake or turn system, move it
by a suitable truck (Reference the part of
truck move); Other reasons, use a suitable
truck to traipse, tie the cord outside of
truck. Please abide by the traffic
regulations when traipse the truck on
calzada.
42. After take-down the hood, water
tank cover board, overhead, backrest of
mast, unallowed to operate the truck or
load cargo.
43. There are enough light at truck
work ground. At night, open the head
lamp to collocate enough lamp-house.
44. Only in the event that the truck
manufacturer is no longer in business and
there is no successor in the interest to the
business, the user may arrange for a
modification or alteration to a powered
industrial truck provided, however, that
the user shall:
a) Arrange for the modification or
alteration to be designed, tested and
implemented by an engineer(s) expert in
industrial trucks and their safety;
b) Maintain a permanent record of
the design, test(s) and implementation of the
modification or alteration;
c) Approve and make appropriate
changes to the capacity plate(s), decals,
tags and instruction handbook;
d) Affix a permanent and readily
visible label to the truck stating the
manner in which the truck has been
modified or altered together with the date
of the modification or alteration, and the
name and address of theorganisation that
accomplished the tasks.
